Open Access

Joél Schukraft, Moritz Fünkner, Feiyun Zhang, Haoyang Liu, Michael Leander Wilhelm, Louis Kaptur, Frank Henning, Andrew N. Hrymak

• Thermoplastic fiber reinforced composites have crucial benefits over thermoset composite materials regarding sustainability and reusability, as well as in post-processing, like welding or forming. In this study in-situ pultruded unidirectional reinforced glass fiber reinforced anionic polyamide composites are investigated for their formability, to be used as local stiffening elements in light weight over molded polymer matrix composites. A forming setup was designed and manufactured and a systematic study on forming parameters was carried out in a bending radius ranging from 10 to 30 mm, pre-heating temperature from 180 to 235 degrees C and a fiber volume content from 60 to 70 vol -%. The formed profiles were investigated regarding their stiffness in a bridged apex flexure test and a cantilever flexure test and the microstructure of the composite with microscopy and computed tomography. The ideal forming parameters were found to be 20 mm bending radius, 70 vol.-% glass fiber contentThermoplastic fiber reinforced composites have crucial benefits over thermoset composite materials regarding sustainability and reusability, as well as in post-processing, like welding or forming. In this study in-situ pultruded unidirectional reinforced glass fiber reinforced anionic polyamide composites are investigated for their formability, to be used as local stiffening elements in light weight over molded polymer matrix composites. A forming setup was designed and manufactured and a systematic study on forming parameters was carried out in a bending radius ranging from 10 to 30 mm, pre-heating temperature from 180 to 235 degrees C and a fiber volume content from 60 to 70 vol -%. The formed profiles were investigated regarding their stiffness in a bridged apex flexure test and a cantilever flexure test and the microstructure of the composite with microscopy and computed tomography. The ideal forming parameters were found to be 20 mm bending radius, 70 vol.-% glass fiber content and 215 degrees C pre-heating temperature of the profiles, for the forming setup used. For forming with lower radius and temperatures, the profiles showed fiber buckling, undulations and folded fiber bundles up to fiber breakage in the inner of the formed radius. For higher temperatures, degradation on the profile surface got visible and squeeze out effects, reducing the profile shape quality. This led to lower mechanical properties and higher scatter of values. The findings give insights to process optimization for forming thermoplastic pultrusion profiles and help to prevent pre-damage during manufacturing. With this, the study participates in making fiber reinforced polymer matrix composites more sustainable and in the green transformation of structural light-weight materials.…